Install vmware tools netware 5




















For example, if the host IP address is For the router gateway, enter the host's IP address Note the host's IP address for VMnet8 and change the last octet so it is greater than the last octet in the IP address of the host.

Be sure to install VMware Tools in your guest operating system. For details, see the manual for your VMware product or follow the appropriate link in the knowledge base article at www. NetWare servers do not idle the CPU when the operating system is idle.

Common problem I see when people can't install the VMWare tools onto a virtual machine is they made the wonderful choice to remove the virtual CDROM from the virtual machine setup since it is "mostly" un needed.

Then, if memory serves me right cause I haven't used 5. When you type in "volumes" you should see a "vmwtools" volume. Then type "vmwtools:setup" to install the tools. And don't let this slide away from you. NetWare run like junk in VMWare or any virtual environment for that matter. NetWare will eat up your physical CPU in virtualization with out something to limit it. You can use resource reservations to do this, but still better to get the VMWtools installed on the VM. On NetWare 5. Hi asredanesh, If you connect to the server using a windows client with the Novell client installed you can browse the content of the CDROM or us the edit utility to browse the cd - "load edit" then hit the insert key to browse mounted volumes.

Depends on the product you are trying to install as to the next steps to take. Regards Jim. Red Flag This Post Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework. You can install NetWare 5. When you configure a virtual machine for a NetWare 5.

NetWare 5. On the reboot, you see a message that says "Operating System not found" and a dialog box with a message that says "No bootable CD, floppy or hard disk was detected. In order to boot from the CD the second time, you must change the boot order. As the virtual machine boots, click inside the virtual machine window. When the VMware logo appears, press Esc. Use the arrow keys to select the CD drive as the boot device, then press Enter.

To install NetWare 5. This causes IP networking to fail. At a command prompt on a Linux host, type ifconfig. Note the host's IP address for VMnet1 and change the last octet so it is greater than the last octet in the IP address of the host.



0コメント

  • 1000 / 1000